meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
drives:teac_fd55gfv [2022/03/23 10:30] – [Jumper Settings] Added DCRY and LG-HG flandrives:teac_fd55gfv [2022/03/25 10:22] (current) – [Jumper Settings] Clarified that drive select doesn't matter much. flan
Line 37: Line 37:
  
 ==== Jumper Settings ==== ==== Jumper Settings ====
- 
-⚠️ **The DCRY jumper should be on DC for the Applesauce!** 
  
 The following jumper settings are known to work with the Applesauce: The following jumper settings are known to work with the Applesauce:
  
-^ DCRY  | DC            | Disk Change/Ready on line 34  +^ DCRY  | RY            | Disk Change/Ready on line 34<sup>*</sup> 
-^ DS0   | Connected     | Drive select                  +^ DS0   | Connected     | Drive select (any drive number is fine)  
-^ DS1   | Not connected | :::                           +^ DS1   | Not connected | :::                                      
-^ DS2   | Not connected | :::                           +^ DS2   | Not connected | :::                                      
-^ DS3   | Not connected | :::                           +^ DS3   | Not connected | :::                                      
-^ U1    | Not connected | Head load on motor on         +^ U1    | Not connected | Head load on motor on                    
-^ U2    | Connected     | :::                           +^ U2    | Connected     | :::                                      
-^ HL    | Not connected | Pin 4 is Head Load            +^ HL    | Not connected | Pin 4 is Head Load                       
-^ IU    | Not connected | Pin 4 is In Use               +^ IU    | Not connected | Pin 4 is In Use                          
-^ LG-HG | HG (both!)    | Sets High Density input level |+^ LG-HG | HG (both!)    | Sets High Density input level            | 
 + 
 +<sup>*</sup> ⚠️ Make a note of the original setting if you change the DCRY jumper! See [[:howto:drivesetup#disk_change_ready_line_34|DISK CHANGE/READY]] for a more thorough explanation.
  
 {{:drives:teac_fd55gfv_jumpers.jpg?400|}} {{:drives:teac_fd55gfv_jumpers.jpg?400|}}