meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
drives:8 [2022/02/15 23:40] – Important warning about Tandon drives wohalidrives:8 [2024/05/27 05:55] (current) – pdevine
Line 43: Line 43:
 The D Bit [[http://www.dbit.com/fddc.html|FDDC]] "is a DC-DC converter which boosts/negates the voltages from a PC power supply to those needed by most 8" floppy drives. It can attach to an IDE power connector on a PC's power supply that has sufficient capacity to power both the PC and an 8" drive". The D Bit [[http://www.dbit.com/fddc.html|FDDC]] "is a DC-DC converter which boosts/negates the voltages from a PC power supply to those needed by most 8" floppy drives. It can attach to an IDE power connector on a PC's power supply that has sufficient capacity to power both the PC and an 8" drive".
  
-Care must be taken to ensure the +5V supply to the drive is well regulated - otherwise, damage to the Applesauce may occur.+Care must be taken to ensure the +5V supply to the drive is well regulated - otherwise, damage to the Applesauce may occur. In addition, remember to always power up the Applesauce before powering up the floppy drive. And power down the drive before powering down the Applesauce. This will help to reduce the chance of potentially damaging the AS by having power back fed into it. 
  
 ----- -----
Line 49: Line 50:
 ===== Specific Drive Information ===== ===== Specific Drive Information =====
  
 +==== NEC 1165 ====
 +
 +^ Index sensor: |   True |
 +^ # of sides:   |      2 |
 +^ Tracks:       |     77 |
 +^ Step time:    |   3 ms |
 +^ Settle time:  |  18 ms |
 +
 +TODO(vtgearhead): Jumpers and photo.
 +
 +=== Notes ===
 +
 +Manuals [[https://retrocmp.de/fdd/nec/fd1165q_i.htm|available]].
 +
 +----
 ==== QumeTrak 842 ==== ==== QumeTrak 842 ====
  
Line 66: Line 82:
  
 The 3-pin connector powers the spindle motor which runs //all the time//. For running with the Applesauce, one can make a {{ drives:qumetrak_842_ac_power_cord.jpeg?linkonly| power cord }} that plugs into the wall. The 3-pin connector powers the spindle motor which runs //all the time//. For running with the Applesauce, one can make a {{ drives:qumetrak_842_ac_power_cord.jpeg?linkonly| power cord }} that plugs into the wall.
 +
 +Verify the rubber grommets on the solenoids are in good order. Gummy or dry grommets can prevent the head load from engaging or disengaging. Bad grommets can also be a problem on the drive door lock.
  
 ---- ----