meta data for this page
This is an old revision of the document!
NEC FD1157C
These drives are compatible with a standard Floppy interface.
Specifications:
Capacity | Formatted: HD 1.2 MiB; DD 700 KiB |
---|---|
Unformatted: HD 1.6 MiB; DD 1.0 MiB | |
Height | 1.6 in / 41 mm |
Width | 5.7 in / 146 mm |
Depth | 8 in / 203 mm |
Weight | 2.6 lbs / 1.2 kg |
Disk size | 5.25“ |
Heads | 2 |
Surfaces | 2 |
Tracks/Surface | 80 |
Track density | 96 tpi (tracks/in) |
Dit density | HD: 9870 bpi; DD: 5922 bpi |
Record method | MFM |
Rotation rate | HD: 360 rpm; DD: 300 rpm |
Shock rating | Operating: 10 G; Non-operating: 30 G |
Vibration | Operating: 0.5 G @ 0 - 100 Hz; Non-operating 3 G @ 0 - 100 Hz |
Seek time | Track to track: 3 ms |
Settle time | 15 ms |
Data transfer | HD: 500 Kib/s; DD: 250 Kib/s |
Power | +5 V, +12 V |
Power dissipation | 4.8 watts |
MTBF | 12,000 POH |
MTTR | < 15 minutes |
(Specifications come from an online datasheet downloaded from NEC on 2014-08-28.)
Jumper settings from http://jope.fi/drives/necflopp.txt:
Configuration 1: Non-twisted cable | |||||||||
---|---|---|---|---|---|---|---|---|---|
USE | MON | VC | HDE | DEN | M1 | DCG | LM1 | LM2 | DX |
2 | 1 | On | 1 | 1 | On | 2 | 0 | 0 | see note |
note: Drive 1 (A:) has DX=0, drive 2 (B:) has DX=1
Configuration 2: Twisted cable (pin 10-16 twisted) | |||||||||
---|---|---|---|---|---|---|---|---|---|
USE | MON | VC | HDE | DEN | M1 | DCG | LM1 | LM2 | DX |
2 | 3 | On | 1 | 1 | On | 2 | 0 | 0 | 1 |
note: Drive 2 and controller are on one the same side of the twist, and drive 1 is on the other side. Both drive 1 (A:) and drive 2 (B:) have DX=1.
Cleaning video: