meta data for this page
This is an old revision of the document!
5.25" PC Floppy Drives
Most PC drives work at 300 RPM for low-density disks and/or 360 RPM for high-density disks. If the drive supports both, it is best to allow the Applesauce to control the speed. This way the client software can analyze the flux timings to figure out at which speed the disk was written, then switch to the correct speed for imaging.
⚠️ Always update the Drive Configuration after changing jumpers!
NEC
FD1157C
Step time | ?? |
---|---|
Settle time | ?? |
Jumpers | ?? |
More details: nec_fd1157C
TEAC
FD55-GFR
Step time: 3 ms (default is 5 ms)
Model | Jumpers | Picture |
---|---|---|
7193-U | RY, D1, I | TEAC FD55-GFR 7193-U |