meta data for this page
This is an old revision of the document!
TEAC FD-55 GFV
The TEAC FD-55 GFV has a notably different PCB from its other variants, and does not include the same cross shaped drive speed jumper as literally all of its other iterations.
Specifications
TODO(flan): Verify this table against the spec sheet below after questions are resolved:
https://discord.com/channels/901677188162658315/901688864916271144/955941540616884234
Capacity | Formatted: HD 1.2 MiB; DD 700 KiB |
---|---|
Unformatted: HD 1.6 MiB; DD 1.0 MiB | |
Height | 1.63 in / 41.3 mm |
Width | 5.75 in / 146 mm |
Depth | 7.99 in / 203 mm |
Weight | 1.2 kg nominal, 1.35 kg maximum |
Disk size | 5.25“ |
Heads | 2 |
Surfaces | 2 |
Tracks/Surface | 80 |
Track density | 96 tpi (tracks/in) |
Bit density | HD: 9870 bpi; DD: 5922 bpi |
Record method | MFM |
Rotation rate | HD: 360 rpm; DD: 300 rpm |
Shock rating | Operating: 10 G; Non-operating: 30 G |
Vibration | Operating: 0.5 G @ 0 - 100 Hz; Non-operating 3 G @ 0 - 100 Hz |
Seek time | Track to track: 3 ms |
Settle time | 15 ms |
Data transfer | HD: 500 Kib/s; DD: 250 Kib/s |
Power | +5 V, +12 V |
Power dissipation | 4.8 watts |
MTBF | 12,000 POH |
MTTR | < 15 minutes |
(Specifications come from z1013.mrboot.de and have been translated from German.)