meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
drives:pc525 [2022/02/11 13:44] – Added skeleton for NEC FD1157C flandrives:pc525 [2023/01/18 09:17] (current) – Added Panasonic JU-475 flan
Line 1: Line 1:
 ====== 5.25" PC Floppy Drives ====== ====== 5.25" PC Floppy Drives ======
  
-Most PC drives work at 300 RPM for low-density disks and/or 360 RPM for high-density disks. If the drive supports both, it is best to allow the Applesauce to control the speed. This way the client software can analyze the flux timings to figure out at which speed the disk was written, then switch to the correct speed for imaging.+The Applesauce (rev 2 and higher) works with most PC floppy drives, but requires the [[https://applesaucefdc.com/hardware/#:~:text=About%20Sync%20Sensors.-,pc%20drive%20cable%20kit,-%E2%80%93%20%2415|PC Drive Cable kit]]. The cable in this kit is unique to Applesauce, so best to just buy it. 
 + 
 +⚠️ The cable has two connectors, but **only connect one drive at a time**! 
 + 
 +Drives can be configured to be either Drive 1 or Drive 2—the Applesauce will try both. The drive should also be configured for a **non-twisted** cable. 
 + 
 +If the drive supports both low-density disks (300 RPM) and high-density disks (360 RPM), then it best to allow the Applesauce to control the speed. This way the client software can analyze the flux timings to figure out at which speed the disk was written, then switch to the correct speed for imaging.
  
 ⚠️ **Always update the Drive Configuration after changing jumpers!** ⚠️ **Always update the Drive Configuration after changing jumpers!**
  
 +----
 +
 +===== EPSON =====
 +
 +==== SD-700 ====
 +
 +^ Step time   |   3 ms |
 +^ Settle time |  15 ms |
 +^ Jumpers     |  L-H: **H**, D-S: **D** |
 +
 +[[drives:epson_sd700|Details (specs, jumpers, etc.)]]
 +
 +----
 +
 +===== Panasonic =====
 +
 +==== JU-475 ====
 +
 +^ Step time   |   3 ms |
 +^ Settle time |  15 ms |
 +^ Jumpers     |     BX |
 +
 +[[drives:panasonic_ju475|Details (specs, jumpers, etc.)]]
 +
 +----
 ===== NEC ===== ===== NEC =====
  
 ==== FD1157C ==== ==== FD1157C ====
  
-^ Step time   | ?? | +^ Step time   |   3 ms | 
-^ Settle time | ?? | +^ Settle time |  15 ms | 
-^ Jumpers     | ?? |+^ Jumpers     |     ?? |
  
-More details: [[drives:nec_fd1157C]]+[[drives:nec_fd1157C|Details (specs, jumpers, etc.)]] 
 + 
 +----
  
 ===== TEAC ===== ===== TEAC =====
Line 22: Line 55:
  
 ^ Model  ^ Jumpers   ^ Picture ^ ^ Model  ^ Jumpers   ^ Picture ^
 +| 149-U  | RY, D1, I | {{ :drives:as-teac-fd-55gfr-149-u-jumpers.jpg?linkonly | TEAC FD55-GFR 149-U }} |
 +| 193-U  | RY, D1, I | {{ :drives:as-teac-fd-55gfr-193-u-jumpers.jpg?linkonly | TEAC FD55-GFR 193-U }} |
 | 7193-U | RY, D1, I | {{ gallery:teac_fd55-gfr_7193u.jpeg?linkonly | TEAC FD55-GFR 7193-U }} | | 7193-U | RY, D1, I | {{ gallery:teac_fd55-gfr_7193u.jpeg?linkonly | TEAC FD55-GFR 7193-U }} |
 +
 +
 +==== FD55-GFV ====
 +
 +^ Step time   |   3 ms |
 +^ Settle time |  15 ms |
 +^ Jumpers     |     ?? |
 +
 +[[drives:teac_fd55gfv|Details (specs, jumpers, etc.)]]
 +
 +----